Riven Edgemere has a randomised texture applied to the surface to ensure an attractive and variegated appearance, and a finish which closely resembles natural slate.
Experiencing the vast variety of textures and colours that our roof tiles provide up close, can guide you in the decision making process when selecting roof coverings. Our efficient sample service can help you in the process.
Riven Edgemere is a single-lap solution that allows quick and easy installation and is compatible with our full range of ventilation and dry fix systems.
The clean, sleek appearance of these slate-like tiles offers enormous kerb appeal. These tiles are only 18mm thick and are laid with a special broken-bond laying technique, unlike standard interlocking tiles and great performance at pitches as low as 17.5°.
Accreditation to the BES 6001 framework standard for 'Responsible Sourcing' means that projects using our concrete interlocking slates can now achieve extra credits under BREEAM and the Home Quality Mark (HQM).
| Size of Tile |
420mm x 330mm |
| Minimum Pitch |
22.5° Smooth (75mm headlap) 17.5° Smooth (100mm headlap) |
| Maximum Pitch | 90° |
| Minimum Headlap |
75mm (22.5° and above) 100mm (below 22.5°) |
| Maximum Gauge |
345mm |
| Cover Width |
298mm (nominal) |
| Covering Capacity |
9.7 slates/m² at 75mm headlap 10.5 slates/m² at 100mm headlap |
| Weight of Tiling |
44kg/m² (0.43kN/m²) at 75mm headlap 47.5kg/m² (0.47kN/m²) at 100mm headlap |
| Battens Required |
2.9 lin.m/m² at 75mm headlap 3.1 lin.m/m² at 100mm headlap |
| Batten Size Recommended |
38 x 25mm for rafters/supports not exceeding 450mm centres 50 x 25mm for rafters/supports not exceeding 600mm centres |
| Tile Nails |
Slate nails 45mm x 3.35mm |
| Hanging length |
395mm (nominal) |
| Fixing clips |
Eaves, verge and tile clips, SoloFix |
| Authority |
BS EN 490 |
Oops! There was an issue retrieving our products. Please try again.
Sorry, no products were found. Please try again.
